Was, $19,130.00 $19,130.00 +gst

For high volumes in record time you can’t go past the Semak tandem range of rotisseries. The tandem range has been designed specifically for high volume fast food retailers with small footprints. Tandem affords the operator greater flexibility, and the option of Digital Controls allows automated cooking with multiple cooking programs and dedicated cleaning cycle.

Cleaning: We recommend the D92 Johnson Diversey non-caustic cleaner. This is a heat activated cleaner designed to lift the worst grease and grime off stainless steel so that you can maintain the oven in sparkling as new condition. Simply unload the machine, spray the oven with cleaner and allow to sit for 10-20 minutes and wipe out with hot soapy water. Cleaned according to a HACCP Program cleaning takes 10-15 minutes to complete.


•Available in multiple sizes and manual or digital operation
•High Volume for intensive commercial needs
•Space saving design for tight spots and small stores
•12 Month Warranty




Dimensions (mm)

900 x 735 x 1810


3 Phase




1 Year

In Depth

Supplied with:
- Low Profile Trolley

Base Dimensions

930 x 460

Cook Time (S10-S13)

90 Minutes

Cook Time (S14+)

105+ Minutes

Shipping Dimensions (cm)

900 x 735 x 1810

Shipping Weight (Kg)


WARRANTY THIS WARRANTY APPLIES ONLY TO PRODUCTS MANUFACTURED AND SOLD IN AUSTRALIA The benefits conferred by this warranty are an alternative to all other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. Semak Australia. Warrant each new SEMAK appliance manufactured by SEMAK to be free from defects in materials or manufacturing. Should defects due to faulty materials or manufacturing process develop within the warranty period, the appliance will be repaired without charge providing all conditions of this warranty are observed. 1. Proof of Purchase and Warranty card must be retained and available on request. 2. This Warranty is void if the equipment has been damaged due to misuses neglect or is used for a purpose for which it was not suited; and no repairs, alterations or modifications have been attempted by other than Semak or its authorised Service Agent. 3. Semak Australia. Reserves the right to reject a claim for warranty if service is required due to misapplication, improper installation, inadequate wiring, and incorrect voltage conditions. Under no circumstances shall SEMAK or its agents bear responsibility for consequential damages of any kind. 4. Where required by Statute or local authority, equipment must be installed by qualified person in accordance with all relevant regulations. Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia. 7. The above does not preclude the purchaser from their Statutory rights as a consumer.

 If you have any questions about the availiablity of an item, please contact one of our friendly team on 1300 436 665 or use our Live Chat tab below.