Was, $1,031.00 $928.00 +gst

The new TempoPro range of Benchtop Auto Fill Boiling water heaters feature a brushed stainless steel finish, stainless steel heating tanks and are designed to be easily installed using the self connect 1.5 metre food quality hose and fitted drip tray. Simply plug into your standard 10 amp outlet for easy electrical connection as well.
No more relying on someone to fill the urn, and temperature is electronically controlled
at around 97°c.

A. Location

The unit must be installed on a horizontal work surface with sufficient strength to support its weight once full. It should be located in an area where there is adequate space to use the boiler safely. The unit will require an extra 50mm clearance at the rear for the water supply connection. The unit is not to be exposed to the elements.

B. Plumbing

To be installed in accordance with
AS/NZS3500 plumbing regulations. Designed for direct connection to a potable (drinkable) cold water supply with minimum pressure of 172 kPa. Maximum 700 kPa. If static pressure exceeds 700 kPa, a 500 kPa pressure limiting valve should be fitted. An isolating valve (not supplied) should be fixed between the water supply and the operational unit. Water connection is ¾” BSP and is supplied with a 1.5meter hose. The supplied drip tray has a limited capacity and is designed to handle small spillages and drips. Where ever possible it is recommended that a connection to a permanent waste outlet be made.

C. Electrical

Should be connected to a 10 amp GPO 220-240 Volt AC power supply in accordance with AS/NZS 3350 and 3000 wiring regulations.


Birko Model

Boiling water

Order code

Cups / hour

Total rating

Unit Dimensions WxDxH

Weight (full)

Tempo Pro Compact





218 x 468* x 440


Twelve months full parts and labour warranty.

 If you have any questions about the availiablity of an item, please contact one of our friendly team on 1300 436 665 or use our Live Chat tab below.